<2025>

​

1. Hadiseh Esmaeilpoor, Mahdi Aghaahmadi, Hyun Jong Yoo, Chan Woong Park, Tae Jin Jang, Seok Su Sohn, Jeoung Han Kim* "Mechanical response and microstructural evolution of a composite joint fabricated by green laser dissimilar welding of VCoNi medium entropy alloy and 17-4PH stainless steel" Journal of Materials Science & Technology, vol. 213 (2025) 223-240

​​

​

<2024>

​​1. Jungsu Bin, Hyunbae Gee, Taesung Park, UiJun Go, Jeoung Han Kim*, Youn-Seoung Lee*, "Composites of equiatomic Y, La, Ce, Nd, and Gd rare earth oxides: Chemical-shift effects and valence spectra " Current Applied Physics, vol. 59 (2024) 85-94

​

2. Ui Jun Ko , Ju Hyeong Jung, Jung Hyun Kang, Kyunsuk Choi,* and Jeoung Han Kim*, "Enhanced Microstructure and Wear Resistance of Ti–6Al–4V Alloy with Vanadium Carbide Coating via Directed Energy Deposition" Materials, vol.17 (2024) 733. 

​

3. Raj Narayan Hajra, Byoung Jun Han, Jin Woong Park, Woo Hyeok Kim, Joonho Lee, Won-Seok Ko, Jeoung Han Kim* "In-situ study of σ phase evolution in 25Cr-7Ni duplex stainless steel (DSS): Unrevealing critical insight" Materials & Design, vol. 244 (2024) 113141

​

​​​4. Uijun-Ko, Byungjun-Han, Kyoung-Tae ParK, Marzieh-Ebrahimian, JH-Kim*, "Microstructure evolution through cryogenic rolling of ultra-high purity titanium produced by electron beam melting" Arch. Metall. Mater. vol. 69 (2024) 157-162

​

5. Andrews Nsiah Ashong, Barton Mensah Arkhurst, Youn Seoung Lee, Mok-Young Lee, Jeoung Han Kim* "Effect of hydrogen fluoride and magnesium oxide on AZ31 Mg alloy/carbon fiber-reinforced plastic composite by thermal laser joining technique" Journal of Magnesium and Alloys vol. 12 (2024)  2874-2889

​

6. Godwin Kwame Ahiale, Hamid Reza Javadinejad, Mokoung Lee, HyunCheol Kim, Jeoung Han Kim*

​"Microstructure and mechanical properties of ultrasonically welded aluminum to Zn–Mg–Al coated and uncoated mild steels" ​Journal of Materials Research and Technology, vol. 33 (2024) 5102-5118.

​

​

<2023>

1. Andrews Nsiah Ashong, Barton Mensah Arkhurst, Seung-Min Yang, Taesung Park,
Sanghoon Noh, Hye Jung Chang, Jeoung Han Kim*, "Effect of radio-frequency plasma spheroidization on the microstructure and mechanical properties of 10Cr ferritic oxide dispersion-strengthened steel",  Materials Science and Engineering A, vol. 863 (2023) 144528.

​

2. Chan Woong Park, Raj Narayan Hajra, Nana Kwabena Adomako, Woong Choo, Seung-Min Yang, Seok-Jun Seo*, Jeoung Han Kim*, "Additive manufacturing of Ti-6Al-4V/V-interlayer/17-PH steel functionally graded material using angular and spheroidal V powders" Materials Letters , vol. 337 (2023) 133936.

​

3. Giseung Shin, Marzieh Ebrahimian, Nana Kwabena Adomako, Haneul Choi, Dong Jun Lee,
Ji-Hyun Yoon, Dae Whan Kim, Jun-Yun Kang, Min Young Na, Hye Jung Chang*, Jeoung Han Kim* "Microstructural evolution and mechanical properties of functionally graded austenitic–low-carbon steel produced via directed energy deposition" Materials and Design, vol. 227 (2023) 111681. 

​

4. Woong Choo, Marzieh Ebrahimian*, Kyunsuk Choi, Jeoung Han Kim*, "Influence of Heat Treatment on the Microstructure and Hardness of 17‑4PH Stainless Steel Fabricated Through Direct Energy  Deposition", Metals and Materials International, vol. 29 (2023) 1750-1760.

​

5. Raj Narayan Hajra*, Manmath Kumar Dash, Woong Chu,  A. N. Singh, Kyung‑Wan Nam, Jeoung Han Kim*, "High‑temperature phase stability, γ→δ transformation of ferritic/ martensitic steel studied by diferential scanning calorimetry and electron backscatter difraction", Journal of Thermal Analysis and Calorimetry , vol. 148 (2023) 3357–3371

​

6. Marzieh Ebrahimian, Mohsen Saboktakin Rizi, Sun Ig Hong, Jeoung Han Kim*, "Effects of molybdenum on hot deformation behavior and microstructural evolution of Fe40Mn40Co10Cr10C0.5 high entropy alloys" Science and Technology of Advanced Materials, vol.  24 (2023) 2186119.

​

7. Chan Woong Park, Raj Narayan Hajra*, Sung Hoon Kim, Se-Hwan Lee, Jeoung Han Kim*

"Optimizing multi-interlayered additive manufacturing for high strength robust joints in Inconel 718 and Ti-6Al-4V alloys", Journal of materials research and technology ,vol. 25 (2023) 855-8 7 2

​

8. Raj Narayan Hajra, Chan Woong Park, Kyunsuk Choi and Jeoung Han Kim*, "Interlayer Tailoring of Ti–6Al–4V and 17-4PH Stainless Steel Joint by Tungsten Inert Gas Welding" Materials, vol. 16 (2023) 4370

​

9. UiJun Ko, Hamid Reza Javadinejad, Kyoung-Tae Park, Namhun Kwon, and Jeoung Han Kim* "Kinetic study of electrochemical deoxidation of commercially pure titanium in molten magnesium chloride" Journal of Materials Science, vol. 58 (2023) 11235–11251

​

10. Hyun Jong Yoo, Hyoungwon Park, Jeoung Han Kim, Changkyoo Park*, "Effect of paint removal with kilowatt level nanosecond pulsed laser on microstructure and mechanical properties of stainless steel"  Optics and Laser Technology, vol. 163 (2023) 109434

​

11. Jin Woong Park, Godwin Kwame Ahiale, Won Doo Choi, Tae-Wook Na, Seungchul Lee, Hyun-Ju Choi, Jeoung Han Kim*, "Effects of Nb addition on the microstructure and low-cycle fatigue properties of heat-resistant stainless steel" Journal of Materials Research and Technology, vol. 27 (2023) 5772-5782

​

12. Raj Narayan Hajra, Chinnapat Panwisawas, Jin Woong Park, Woong Choo, Byoung Jun Han, Jeoung Han Kim*, "High-temperature phase stability and phase transformations of Niobium-Chromium Laves phase: Experimental and first-principles calculation studies" Materials & Design, vol. 236 (2023) 112483

​

​

​

<2022>

1. Andrews Nsiah Ashong, Min Young Na, Hye Jung Chang, Taesung Park, Go Ui Jun, Sang Hoon Noh**, Jeoung Han Kim*, "Manganese effect on the microstructural transformation and mechanical properties of oxide dispersion strengthened steels fabricated with pre-alloyed powders",  Materials Science and Engineering A, vol. 830, (2022) 142282.

​

2. Hyun Jong Yoo, Seungwoo Baek, Jeoung Han Kim, Jiyeon Choi, Yoon-Jun Kim*, Changkyoo Park*, "Effect of laser surface cleaning of corroded 304L stainless steel on microstructure and mechanical properties" Journal of Materials Research and Technology. vol. 16, (2022) 373-385.

​

3. Mehrdad Ghiasabadi Farahani* , Jeoung Han Kim*, Matias Jaskari, Leo Pentti Karjalainen, Puspendu Sahu, "Newer insights into the discrimination of pole mechanisms of twinning in a face-centered cubic high-Mn steel" Materialia vol. 21 (2022) 101349

​

4. M.H. Barati Rizi, M. Ghiasabadi Farahani*, Mahdi Aghaahmadi, Jeoung Han Kim*, L.P. Karjalainen, P. Sahu, "Analysis of strain hardening behavior of a high-Mn TWIP steel using electron microscopy and cyclic stress relaxation", Acta Materialia vol. 240 (2022) 118309

​

5. Hamid Reza Javadinejad, Mokyoung Lee, Cheol Hwee Shim, Hye Jung Chang, Jeoung Han Kim*, "Interfacial reaction mechanism during laser brazing of Zn–Mg–Al-coated steel to AA 6061 aluminum alloy" Journal of Manufacturing Process vol.83 (2022) 471-487.

​

6. Nana Kwabena Adomako, John J. Lewandowski, Barton Mensah Arkhurst, Haneul Choi, Hye Jung Chang, and Jeoung Han Kim* "Microstructural and mechanical properties of multi-layered materials composed of Ti-6Al-4V, vanadium, and 17-4PH stainless steel produced by directed energy deposition" Additive Manufacturing vol. 59 (2022) 103174.

​

<2021>

1. Nana Kwabena Adomako, Heon-Joon Park, SungChul Cha, Mokyoung Lee, Jeoung Han Kim*,

   "Microstructure evolution and mechanical properties of the dissimilar joint between Inconel IN718 and

    STS304" Materials Science and Engineering A, vol. 799 (2021) 140262.

​

2. Kyu-Sik Kim, Young-Kyun Kim, Hyeon-Jin Kim, Jeoung Han Kim, Kee-AhnLee*, "Influence of warm

    caliber rolling on tensile response and high cycle fatigue behavior of hypereutectoid steel", Journal of

    Materials Research and Technology, vol. 10, (2021) 205-215.

​

3. Nana Kwabena Adomako, Giseung Shin, Nokeun Park, Kyoungtae Park**, Jeoung Han Kim*, "Laser

   dissimilar welding of CoCrFeMnNi-high entropy alloy and duplex stainless steel" Journal of Materials

  Science & Technology, vol. 85, (2021) 95-105.

​

4. Andrews Nsiah Ashong, Mokyoung Lee, Sung-Tae Hong, Youn Seoung Lee**, Jeoung Han Kim*, "Refill

    Friction Stir Spot Welding of Dissimilar AA6014 Al Alloy and Carbon-Fiber-Reinforced Polymer

    Composite", Metals and Materials International, vol. 27, (2021) 95-105.

​

5. Giseung Shin, Yongho Park**, Dae Whan Kim, Ji hyun Yoon**, Jeoung Han Kim* "Effect of Post-Weld

    Heat Treatment on Microstructure and Hardness Evolution of Functionally Gradient Materials Produced

    by Direct Energy Deposition", Korean J. Met. Mater,  vol. 59, (2021) 81-98.

​

6. Nana Kwabena Adomako, Jeoung Han Kim*, "Microstructure and mechanical properties of dissimilar

   laser lap joint of CoCrFeMnNi-high entropy alloy and duplex stainless steel" Materials Letters , vol. 288,

  (2021)129354.

​

7. Nana Kwabena Adomako, Sung Hoon Kim, Ji Hong Yoon, Se-Hwan Lee, and Jeoung Han Kim*, "Finite

   Element Modeling of Residual Stress at Joint Interface of Titanium Alloy and 17-4PH Stainless Steel"

   Metals, vol. 11, (2021) 629.

​

8. Barton Mensah Arkhurst, Jee Hwan Bae, Min Young Na, Hye Jung Chang, Hyun Gil Kim, Il Hyun Kim,     Ho Jin Ryo, Jeoung Han Kim* "Effect of Tellurium on the Microstructure and Mechanical Properties of       Fe-14Cr Oxide-Dispersion-Strengthened Steels Produced by Additive Manufacturing" Journal of 

   Materials Science & Technology, vol. 95, (2021) 114-126.

​

9. Andrews Nsiah Ashong, Youn Seoung Lee**, Kwang Soo Park, Mok-Young Lee, and Jeoung Han Kim*,

  "Effect of HF treatment on the bonding strength of laser-bonded Mg alloy/carbon fiber-reinforced plastic

   joint: XPS and NEXAFS study" Applied Surface Science, vol. 556, (2021) 149782.

​

10. Hamid Reza Javadinejad, Giseung Shin, Hyunseok Lee, Mi-Seon Choi**, Jaehoon Park, Jonghun

      Yoon**, and Jeoung Han Kim*, "Origin of surface ridging in Ti-6Al-4V sheets produced by pack rolling

     and its effect on microstructural and mechanical properties"  Journal of Materials Processing

    Technology, vol. 297, (2021) 117228.

​

11. Tae-Sung Park, Nana Kwabena Adomako, Andrews Nsiah Ashong, Young-Kuk Kim, Seung-min Yang,

     and Jeoung-han Kim*, "Interfacial Structure and Physical Properties of High-Entropy Oxide Coatings

     Prepared via Atmospheric Plasma Spraying" Coatings, vol. 11 (2021) 755.

​

12. Chan Woong Park, Nana Kwabena Adomako, Min Gyu Lee, Jae Hyeok Kim, Jeoung Han Kim*

   "Interfacial structure and pore formation mechanism during laser cladding of pure vanadium on Ti-6Al-

   4V alloy"  International Journal of Refractory Metals and Hard Materials, vol.101 (2021) 105671.

​

13. YuHyeong Jeong, Giseung Shin, Choo Woong, Jeoung Han Kim, and Jonghun Yoon*

    "Dissimilar materials welding with a standoff-free vaporizing foil actuator between TRIP 1180 steel

    sheets and AA5052 alloy" Materials, vol. 14 (2021) 4969.

​

14. Taesung Park, Hamid Reza Javadinejad, Young-Kuk Kim, Hye Jung Chang, Haneul Choi, Choo

    Woong, Andrews Nsiah Ashong, Youn Seoung Lee, Jeoung Han Kim* "Effect of processing route on

    the crystal structure and physical properties of bixbyite high-entropy oxides" Journal of Alloys and

   Compounds, vol. 893 (2021) 162108. 

​

​

<2020>

1. M. Ghiasabadi Farahani*, A. Zarei-Hanzaki*, H.R. Abedi*, Jeoung Han Kim*, M. Jaskari, P. Sahu*,

    L.P.  Karjalainen*, "On the activation of alternated stacking fault pair twinning mechanism in a very

    large-grained Fe–29Mn–2.4Al steel" Scripta Materialia 178 (2020) 301–306.

​

2. Han Sol Cho, Seong JunBae, Young SangN, Kwang Seok Lee*, Jeoung Han Kim, Dong Geun Lee, 

   "Influence of reduction ratio on the microstructural evolution and subsequent mechanical properties of

   cold-drawn Co10Cr15Fe25Mn10Ni30V10 high entropy alloy wires", Journal of Alloys and Compounds, 

   vol. 82125 (2020) article 153526.

​

3. Taesung Park, Jeoung Han Kim*, "Tensile properties and microstructure evolution during two-stage

    tensile testing of CoCrFeMnNi high-entropy alloy", Journal of Materials Research and Technology, 

    vol. 9, (2020) 7551-7557 (IF=5.289).

​

4. Young-Kyun Kim, Jeoung Han Kim, Yoon-Jun Kim, David N. Seidman, Kee-Ahn Lee*, "Effect of milling 

    temperatures on the microstructure and high temperature long-term oxidation resistance of oxide-

    dispersion strengthened steels", Corrosion Science vol. 174, (2020) 108833.

​

​

5. Giseung Shin, Yongho Park, Dae Whan Kim, Ji hyun Yoon, Jeoung Han Kim* "A study on the

    influence of laser power on the microstructure and mechanical properties of functionally gradient

    materials produced by direct energy deposition.", Korean J. Met. Mater, vol. 58 (2020) pp. 1-11.

​

6. Chan Woong Park, Mi Seon Choi, Hyunseok Lee, Jonghun Yoon, Hamid Reza Javadinejad*, Jeoung       Han Kim* "High temperature deformation behavior and microstructural evolution of as–cast and hot

   rolled β21S alloy during hot deformation" Journal of Materials Research and Technology, vol. 9 (2020)

   pp. 13555-13569.

​

7. Won-Sang Shin, Hyun Jong Yoo, Jeoung Han Kim, Jiyeon Choi, Eun-Joon Chun, Changkyoo

    Park*, and Yoon-Jun Kim*, "Effect of Laser Heat-Treatment and Laser Nitriding on the Microstructural

    Evolutions and Wear Behaviors of AISI P21 Mold Steel"Metals,  vol. 10 (2020) 1487.

​

​

<2019>

1. Barton Mensah Arkhurst, Jae Bok Seol, Youn Seoung Lee, Mokyoung Lee, Jeoung Han Kim* "Interfacial structure and bonding mechanism of AZ31/carbon-fiber-reinforced plastic composites fabricated by thermal laser joining" Composites Part B: Engineering, Vol. 167 (2019) 71-82.

​

2. Jeoung Han Kim*, Young Sang Na* "Tensile Properties and Serrated Flow Behavior of As‑Cast CoCrFeMnNi High‑Entropy Alloy at Room and Elevated Temperatures" Metals and Materials International, Vol. (2019) 296-303

​

3. Ki Ha Hong, J.B. Seol, Jeoung Han Kim*… “First principles determination of formation of Cr shell on the interface between Y-Ti-O nanoparticle and ferritic steel matrix” Applied Surface Science, vol. 481 (2019) 69-74.

​

4. Nana Kwabena Adomako, Jeng O Kim, Jeoung Han Kim*… “Microstructural evolution and mechanical properties of laser beam welded joints between pure V and 17-4PH stainless steel” Materials Science and Engineering A, vol. 753 (2019) 208-217.

​

5. Nana Kwabena Adomako, Sanghoon Noh, Chang-Seok Oh, Sangsun Yang, and Jeoung Han Kim*… “Laser deposition additive manufacturing of 17-4PH stainless steel onTi-6Al-4V using V interlayer” Materials Research Letters, vol. 7 (2019) 259-266.

​

6. Barton Mensah Arkhurst, Jeoung Han Kim*, Mok Young Lee “Hot metal pressing joining of carbon fiber reinforced plastic to AZ31 Mg alloy and the effect of the oxide surface layer on joint strength” Applied Surface Science, vol. 477 (2019) 241-256.

​

7. Andrews Nsiah Ashong, Na Min Young, Hye Jung Chang*, Taesung Park, Hyung Chan Kim, Sang Hoon Noh, Jeoung Han Kim* "Influence of manganese on the microstructure and mechanical properties of oxide dispersion strengthened steels" Materials and Design, vol. 182 (2019) 107997. 

​

8. Dennis Edgard Jodi, Yongsu Lee , Myeong Hyeon Jang Juhee Jung, Jonggwan Jang, Dong Woon Kim , Jeoung Han Kim, Jong Bae Jeon, Nokeun Park* "Investigation of plastic strain accommodation and recrystallization behavior inCoCrNiCu x medium-entropy alloy" Materials Letters, vol. 253 (2019) 327-330

​

 

<2018>

1. Ki Ha Hong…*, Jeoung Han Kim, Kunok Chang, Junhyun Kwon "The role of Cr on oxide formation in Ni-

Cr alloys: A theoretical study " Computational Materials Science, vol. 142 (2018) 185-191

​

2. Jeoung Han Kim, Ka Ram Lim, Jong Woo Won, Young Sang Na*, Hyoung-Seop Kim "Mechanical properties and deformation twinning behavior of as-cast CoCrFeMnNi high-entropy alloy at low and high temperatures" Materials Science and Engineering A, vol. 712 (2018) 108-113

​

3. Seong-Woong Kim, Jeoung Han Kim* "In-situ observations of deformation twins and crack propagation in a CoCrFeNiMn high-entropy alloy" Materials Science and Engineering A, vol 718, (2018) 321-325.

​

4. J.B. Seol, D. Haley, D.T. Hoelzer, Jeoung Han Kim*… “Influences of interstitial and extrusion temperature on grain boundary segregation, Y−Ti−O nanofeatures, and mechanical properties of ferritic steels” Acta Materialia, vol. 153 (2018) 71-85.

​

5. Barton Mensah Arkhurst, Jeoung Han Kim*…, “Evolution of microstructure and mechanical properties of oxide dispersion strengthened steels made from water-atomized ferritic powder” Metals and Materials International, vol. 24 (2018) 464-480.

​

6. Barton Mensah Arkhurst, Mok Young Lee, Jeoung Han Kim*, “Effect of resin matrix on the strength of an AZ31 Mg alloy-CFRP joint made by the hot metal pressing technique” Composite Structures, vol. 201 (2018) 303-314.

​

7. Seung Yong Yang, YeongJu Kwon, Seong-Woo Choi, Jeoung Han Kim*… “Diffusion Pack Cementation of Hafnium Powder with Halide Activator on Ni-Ti Shape Memory Alloy” Journal of Thermal Analysis and Calorimetry vol. 133 (2018) 5-12

​

8. Nana Kwabena Adomako, Jeoung Han Kim*…, Yong Taek Hyun “High-temperature oxidation behaviour of low-entropy alloy to medium- and high-entropy alloys” Journal of Thermal Analysis and Calorimetry

vol. 133 (2018) 13-26.

​

9. Nana Kwabena Adomako, Jeng O Kim, Se Hwan Lee, K.H. Noh, Jeoung Han Kim* “Dissimilar welding between Ti–6Al–4V and 17-4PH stainless steel using a vanadium interlayer" Materials Science and Engineering A, vol. 732 (2018) 378-397.

​

10. Seung-Yong Yang, Yeon-Wook Kim and Jeoung Han Kim*… “High strain rate and quasi-static compressive behaviors of Ni-Ti shape memory alloy” Science of Advanced Materials vol. 10 (2018) pp. 1083-1086.

​

11. Seung-Yong Yang, Dong-Teak Chung and Jeoung Han Kim*… “Finite element study of brittle fracture by Mohr-Coulomb failure criterion” Science of Advanced Materials vol. 10 (2018) pp. 1315-1319.

​

​

​

​

<2017>

1. Thak Sang Byun*, David T. Hoelzer, Jeoung Han Kim, Stuart A. Maloy, "A comparative assessment of the fracture toughness behavior of ferritic-martensitic steels and nanostructured ferritic alloys" Journal of Nuclear Materials, vol. 484, (2017) pp. 157~167.

​

2. Jeoung Han Kim* and Sung Young… “Effect of Yttrium on Microstructural Evolution and High Temperature Compressive Behavior of Ti–Ni–Hf High Temperature Shape Memory Alloys”, Science of Advanced Materials vol. 9 (2017) pp. 1028-1031.

​

3. Jeoung Han Kim*, Yeon-Wook Kim, and Sung Young… “Dynamic and Static Compressive Behaviors of Highly Porous Ti–Ni–Mo Shape Memory Alloy”, Science of Advanced Materials vol. 9 (2017) pp. 1174-1176.

​

4. Barton Mensah Arkhurst, Jin-Ju Park, Chang-Hoon Lee, and Jeoung Han Kim* "Direct Laser Deposition of 14Cr Oxide Dispersion Strengthened Steel Powders Using Y2O3 and HfO2 Dispersoids", Korean J. Met. Mater, vol. 55 (2017) pp. 550-558.

​

5. Kwangjun Euh, Barton Arkhurst, Il Hyun Kim, Hyun-Gil Kim, and Jeoung Han Kim* "Stability of Y-Ti-O Nanoparticles During Laser Deposition of Oxide Dispersion Strengthened Steel Powder", Metals and Materials International, vol. 23 (2017) pp. 1063-1074.

​

6. Y.K. Kim, Jeoung Han Kim, J.H. Gwon, K.A. Lee* “Effect of Heat Treatment on the Microstructure and Tensile Deformation Behavior of Oxide Dispersion Strengthened Alloys Manufactured by Complex Milling Process” Archives of Metallurgy and Materials, vol. 62, (2017) 1335-1340.

​

​

<2016>

1. Jeoung Han Kim*, Kyong Min Kim, Jong Taek Yeom, Sung Young "Effect of yttrium on martensite-austenite phase transformation temperatures and high temperature oxidation kinetics of Ti-Ni-Hf high temperature shape memory alloys" Metals and Materials International vol. 22 (2016) pp. 204-208.

​

2. Ki-Ha Hong*, Jeoung Han Kim, Kunok Chang, "Prediction of potential candidates for dispersion strengthening materials in Ni based alloys" Computational Materials Science, vol. 117, May (2016), Pages 215-220.

​

3. Jae-Bok Seol, Kyong Min Kim, and Jeoung Han Kim* "Effect of Combination Milling on the Microstructure and MechanicalProperties of Ferritic Oxide Dispersion-Strengthened Steels" Korean J. Met. Mater., vol. 54, No. 3, (2016) pp. 171~179.

​

4. Do-Hoon Kim, You-Hwan Lee, and Jeoung Han Kim*… “Effect of second aging treatment on the microstructure and mechanical properties of SUH660 alloy” Korean J. Met. Mater., vol. 54, No. 10, (2016) pp. 716-722.

​

5. Jae-Bok Seol and Jeoung Han Kim* "Grain Boundary Segregation and Core/Shell Structured Nanofeatures in Oxide-Dispersion Strengthened Fe-Cr Alloys" Microsc. Microanal. vol. 22 (Suppl 3), (2016), 674-675.

​

6. Jin-Han Gwon, Jeoung Han Kim, and Kee-Ahn Lee* "Effect of cryomilling on the high temperature creep properties of oxidedispersionstrengthenedsteels" Materials Science and Engineering A676 (2016), 209–215

​

7. Jae-Bok Seol, Jeong-Muk Choi, and Jeoung Han Kim* "Influence of Solid Solution Treatment on the Mechanical Properties of A286 Stainless Steels", Science of Advanced Materials vol. 8 (2016) pp. 2290-2294.

​

8. Sung Young, Jong Taek Yeom, Jae Keun Hong, and Jeoung Han Kim* "Diffusion Pack Cementation of Hf Powders on Ni–Ti Shape Memory Alloys", Science of Advanced Materials vol. 8 (2016) pp. 1923-1926.

​

​

<2015>

1. Jin-Han Gwon, Jeoung-Han Kim, Kee-Ahn Lee* “Effects of Cryomilling on the Microstructures and High Temperature Mechanical Properties of Oxide Dispersion Strengthened Steel” Journal of Nuclear Materials, vol. 459 (2015) 205-216.

​

2. N. S. Reddy, Choi Myeong Ho, Jeoung Han Kim*, B. B. Panigrahi, Chong Soo Lee "Artificial neural network modeling on the relative importance of alloying elements and temperatures to the stability of α and β phase in titanium alloys" Computational Materials Science, vol. 107 (2015) 175-183.

​

3. Jeoung Han Kim*, Thak Sang Byun, Eunjoo Shin, Jae-Bok Seol, Sung Young, N. S. Reddy "Small angle neutron scattering analyses and high temperature mechanical properties of nano-structured oxide dispersion-strengthened steels produced via cryomilling" Journal of Alloys and Compounds, vol. 651 (2015) 363-374.

​

4. Kwangjun Euh, Eunjoo Shin, Sung Young, and Jeoung Han Kim………* "Small Angle Neutron Scattering Study on the Microstructural Evolution of Nano-Structured Ferritic Alloys with Different Mechanical Alloying Times" Nanoscience and Nanotechnology Letters, vol. 7 (2015) 754-757.

​

5. Hye Jung Chang, Hye Young Cho, Jeoung Han Kim* "Stability of Y-Ti-O nanoparticles during laser melting of advanced oxide dispersion-strengthened steel powder" Journal of Alloys and Compounds, vol. 653 (2015) 528-533.

​

6. Seong-Woo Choi, Hak-Sung Lee, Yeong-Min Jeon, Tae-Hyun Nam, Jong-Taek Yeom, Seong-Woong Kim, Chan-Hee Park, Jae-Keun Hong, Chang-Seok Oh, and Jeoung Han Kim*, "Effect of Chemical Composition on The Microstructure and High-Temperature Properties of Ti-Ni-Hf High-Temperature Shape Memory Alloys" Korean J. Met. Mater. vol. 53, No. 3, pp. 151~161.

​

 

<2014>

1. Chan Hee Park*…, Jeoung Han Kim, Yong-Taek Hyun, Jong-Taek Yeom, N.S. Reddy “The origins of flow softening during high-temperature deformation of a Ti-6Al-4V alloy with a lamellar microstructure”      Journal of Alloys and Compounds, vol. 582 (2014) pp. 126-129.

 

2. Jeoung Han Kim*…, Chan Hee Park, “Effect of milling temperature on nanoclusters and ultra fine grained microstructure of oxide dispersion strengthened steel” Journal of Alloys and Compounds, vol. 585 (2014) pp. 69-74.

 

3. Jeoung Han Kim*…, Thak Sang Byun, Jae Hoon Lee, Jeon Yeong Min, Seong Woong Kim, Chan Hee Park, Bong Ho Lee: “Effects of processing condition on the microstructural and tensile properties of 14Cr-based oxide dispersion strengthened alloys” Journal of Nuclear Materials, vol. 449 (2014) pp. 300-307.

 

4. Jeoung Han Kim…*, Kyong Min Kim, Thak Sang Byun, Chan Hee Park, Dong Won Lee: “High-Temperature Oxidation Behavior of Nano-Structured Ferritic Oxide Dispersion Strengthened Alloys” Thermochimica Acta, 579 (2014) pp. 1-8.

 

5. Kyong Min Kim, Jong Taek Yeom, Seog Young Yoon, Jeoung Han Kim*…: “High temperature oxidation behavior of Ti-Ni-Hf shape memory alloy” Thermochimica Acta 583 (2014) pp. 1-7.

 

6. Jeoung Han Kim…*, Chan Hee Park, Seong Woong Kim, Jae Keun Hong, Chang-Seok Oh, Yeong Min Jeon, Kyong Min Kim, and Jong Taek Yeom “Effect of microstructure and deformation conditions on thehot formability of Ni-Ti-Hf shape memory alloys” Journal of Nanoscience and Nanotechnology, vol. 14 (2014) 9548-9553.

 

7. Jong-Taek Yeom, Jeoung Han Kim*…, Jae-Keun Hong, Seong Woong Kim, Chan-Hee Park, Tae Hyun Nam, Kee-Young Leel “Hot Forging Design of As-Cast NiTi Shape Memory Alloy”  Materials Research Bulletin vol. 58 (2014) 234-238.

 

8. Seong-Woong Kim*…, Chan Hee Park, Jeoung Han Kim, Jae Keun Hong, Jong-Taek Yeom “Effect of plastic working on martensitic phase transformation characteristics of TiNi alloys” Journal of Alloys and Compounds vol. 610 (2014) pp. 315-321.

 

9. Jong-Taek Yeom*…, Jeoung Han Kim, Jae-Keun Hong, Jin Mo Lee, Kook Joo Kim, Tae Ok Kim, Nam Yong Kim Hi Sang Chang “Ring-Rolling Design of Yaw Ring for Wind Turbines” Metals and Materials International, vol. 20, No.3 (2014), pp. 521-526.

 

10. Sung Young*…, Jeoung Han Kim, Yeon-Wook Kim, Dong-Teak Chung, and Tae-Hyun Nam “Shear Stress-Strain Behavior of Ni-rich and Ti-rich Shape Memory Alloys at High Strain Rates”  Science of Advanced Materials vol.6 (2014) 2024-2026.

 

11. Sung Young*…, Jeoung Han Kim, Tae-Hyun Nam “Mechanical Behavior of Shape Memory Alloy at Adiabatic Loading” Science of Advanced Materials vol.6 (2014) 2031-2035. 

 

 

<2013>

1. Jeoung Han Kim*…, Thak Sang Byun, Seong Woong Kim, D.T. Hoelzer, Bong Ho Lee “Temperature dependence of strengthening mechanisms in the nanostructured ferritic alloy 14YWT: Part I—Mechanical and microstructural observations” Mater. Sci. and Eng. A, vol. 559 (2013) pp. 101-110.

 

2. Jeoung Han Kim*…, Thak Sang Byun, D.T. Hoelzer, Chan Hee Park, Jong Taek Yeom, and Jae Keun Hong “Temperature dependence of strengthening mechanisms in the nanostructured ferritic alloy 14YWT: Part II—Mechanistic models and predictions” Mater. Sci. and Eng. A, vol. 559 (2013.) pp. 111-118.

 

3. Seong Woong Kim*…, Jeoung Han Kim, Yong Taek Hyun, Jae Keun Hong, and Jong Taek Yeom “Deformation Characteristics of Ti-6Al-4Fe Alloys with Enhanced High Temperature Ductility” Mater. Sci. and Eng. A, vol. 559 (2013) pp. 96-100.

 

4. Jeoung Han Kim*…, Thak Sang Byun, D.T. Hoelzer “High temperature deformation mechanisms of nano-structured ferritic alloys in the context of internal variable theory of inelastic deformation” Journal of Nuclear Materials, 442 (2013) 458–462.

 

5. Chan Hee Park*…, Jeoung Han Kim, Jong-Taek Yeom, Chang-Seok Oh, S.L. Semiatin, Chong Soo Lee “Formation of a Submicrocrystalline Structure in a Two-Phase Titanium Alloy without Severe Plastic Deformation” Scripta Materialia, Vol. 68 (2013) pp. 996-999.

 

6. Jeoung Han Kim*…, Jae Hoon Lee, Seong Woong Kim, Chan Hee Park, Jong Taek Yeom, Thak Sang Byun “Cryomilling effect on the mechanical alloying behaviour of ferritic oxide dispersion strengthened powder with Y2O3” Journal of Alloys and Compounds, l. 580 (2013) pp. 125-130.

 

7. Seong-Woong Kim*…, Yeong Min Jeon, Chan Hee Park, Jeoung Han Kim, Dong-Ho Kim, Jong-Taek Yeom “Martensitic phase transformation of TiNi thin films fabricated by co-sputtering deposition” Journal of Alloys and Compounds, Vol. 580 (2013) pp. 5-9.

 

8. Jae Hoon Lee*…, Jeoung Han Kim “Characterization of Oxide Nanoparticles in Al-Free and Al-Containing Oxide Dispersion Strengthened Ferritic Steels” Journal of Nanoscience and Nanotechnology, Vol. 13 (2013) pp. 6169-6173.

 

 

<2012~>

1. J.H. Kim, D.H. Shin, S.L. Semiatin, and C.S. Lee……*…: "High Temperature Deformation Behavior of a Gamma TiAl Alloy Determined Using the Load-relaxation Test" Mater. Sci. and Eng. A, Vol. A344 (2003) pp. 146.

 

2. Jeoung Han Kim, Tae Kwon Ha, Young Won Chang, and Chong Soo Lee*…: "High-Temperature Deformation Behavior of a Gamma TiAl Alloy : Microstructural Evolution and Mechanisms" Metall. Mater. Trans. A, vol. 34A, (2003) pp. 2165.

 

3. Jeoung Han Kim, S.L. Semiatin, and Chong Soo Lee…*: "Constitutive Analysis of the High-temperature Deformation of  Ti-6Al-4V with a Transformed Microstructure" Acta Materialia, vol. 51 (2003) pp. 5613.

 

4. Jeoung Han Kim, S. L. Semiatin, and Chong Soo Lee*…: "Constitutive analysis of the high-temperature deformation mechanisms of Ti-6Al-4V and Ti-6.85Al-1.6V alloy"  Mater. Sci. and Eng. A, Vol. A394 (2005) pp.366.

 

5. J.T. Yeom, C.S. Lee…*, C.Y. Eum, J.H. Kim, N.K. Park: “FE simulation of Microstructure Evolution during direct age process of Alloy 718” J. of the Chinese Soc. of Mech. Eng. , Vol. 26, pp. 533-538.

 

6. N.S. Reddy, C.S. Lee*…, J.H. Kim, S.L. Semiatin: “Determination of the beta-approach curve and beta-transus temperature for titanium alloys using sensitivity analysis of a trained neural network” Mater. Sci. and Eng. A, Vol. A434 (2006) pp.218~226.

 

7. Jong Taek Yeom, Chong Soo Lee…*, Jeoung Han Kim and Nho-Kwang Park: “Finite-element analysis of microstructure evolution in the cogging of an Alloy 718 ingot” Mater. Sci. and Eng. A, Vol. A449-451 (2007) pp.722~726.

 

8. Kee Ahn Lee*…, Yong Chan Kim, Jung Han Kim, Chong Soo Lee, Jung Namkung, Moon Chul Kim: “Mechanical properties of Fe–Ni–Cr–Si–B bulk glassy alloy” Mater. Sci. and Eng. A, Vol. A449-451 (2007) pp.181~184.

 

9. Jeoung Han Kim*…, Jin Ho Kim, Jong Taek Yeom, Dong-Geun Lee, Su Gun Lim, Nho Kwang Park: “Effec of scandium content on the hot extrusion of Al-Zn-Mg-(Sn) alloy” Journal. Mater. Pro. Tech, Vol. 187-188 (2007) pp. 645~639.

 

10. J.T. Yeom, J.H. Kim, N.K. Park, S.S. Choi, C.S. Lee*…: “Ring rolling design for a large scale ring product of Ti 6Al 4V alloy” Journal. Mater. Pro. Tech, Vol. 187-188 (2007) pp. 747-751.

 

11. J.H. Kim…*, N.S. Reddy, J.T. Yeom, C.S. Lee, N.K. Park: “Artificial neural network modeling of phase volume fraction of Ti alloy under isothermal and non-isothermal hot forging conditions” Journal of Mechanical Science and Technology, Vol. 21 (2007) pp. 1560~1565.

 

12. Jeoung Han Kim*, S.L. Semiatin, and Chong Soo Lee…: “High-temperature deformation and grain-boundary characteristics of titanium alloys with an equiaxed microstructure” Mater. Sci. and Eng. A, Vol. 485 (2008) pp.  601~612.

 

13. N.S. Reddy, You Hwan Lee, Jeoung Han Kim, Chong Soo Lee*…: “High Temperature Deformation Behavior of Ti-6Al-4V Alloy with an Equiaxed Microstructure: A Neural Networks Analysis” Metals and Materials International, Vol. 14, No. 2 (2008), pp. 213~221.

 

14. Jeoung Han Kim*…, N.S. Reddy, Jong Taek Yeom, Jae Keun Hong, Chong Soo Lee, and Nho-Kwang Park: “Microstructure Prediction of Two-phase Titanium Alloy during Hot Forging Using Artificial Neural Networks and FE simulation” Metals and Materials International, Vol. 15, No. 3 (2009), pp. 427~437.

 

15. Jong Taek Yeom, Jeoung Han Kim, Jae Keun Hong, Nho-Kwang Park and Chong Soo Lee*…: “Influence of Initial Microstructure on Hot Workability of Ti-6Al-4V Alloy” International Journal of Modern Physics B, Vol. 23 iss.6 (2009) pp.808 ~ pp.813.

 

16. Jeoung Han Kim…*, N. E. Kang, C.D. Yim, B.K. Kim: “Effect of calcium content on the microstructural evolution and mechanical properties of wrought Mg-3Al-1Zn alloy” Mater. Sci. and Eng. A, Vol. 525 (2009) pp. 18–29.

 

17. Jeoung Han Kim*…, Chae Hoon Lee, Jae Keun Hong, Jae Ho Kim, and Jong Taek Yeom: “Effect of Surface Treatment on the Hot Forming of the High Strength Ti-6Al-4V Fastener”  Mater. Trans, Vol. 50, No.8 (2009) pp.2050-2056.

 

18. Jeoung Han Kim…*, Jong Taek Yeom, Jae Keun Hong, Sung Yong Shim, Su Gun Lim, and Nho Kwang Park: “Effect of Scandium on the Hot extrudability of 7075 Aluminum Alloy” Metals and Materials International, Vol. 16, No.4 (2010), pp. 669-677.

 

19. Jae Keun Hong…*, Chae Hun Lee, Jeoung Han Kim, Jong Taek Yeom, and Nho Kwang Park: “Ti strip properties fabricated by powder rolling method” Surface Review and Letters, Vol. 17, issue 2 (2010), pp. 229-234.

 

20. Jong-Taek Yeom*…, Eun Jeoung Jung, Jee Hoon Kim, Jeoung Han Kim, Jae-Keun Hong, Nho-Kwang Park, Kook-Joo Kim and Seung-Sik Choi: “Modeling and simulation of dynamic recrystallization and grain growth during hot working of Inconel 783 superalloy” Surface Review and Letters, Vol. 17, issue 1 (2010), pp. 105-109.

 

21. Jin Gee Park, Jeoung Han Kim, Nho Kwang Park, and Young Suk Kim*…: “Study of Forming Limit for Rotational Incremental Sheet Forming of Magnesium Alloy Sheet” Metallurgical and Materials Transactions A, Vol. 41A, (2010) pp.97-105.

 

22. Thak Sang Byun…, Jeoung Han Kim, Ji Hyun Yoon, David T. Hoelzer: “High temperature fracture characteristics of a nanostructured ferritic alloy (NFA)” Journal of Nuclear Materials, vol. 407 (2010) pp. 78–82.

 

23. Jeoung Han Kim, Thak Sang Byun*…, David T. Hoelzer: “Tensile fracture characteristics of nanostructured ferritic alloy 14YWT” Journal of Nuclear Materials, vol.407 (2010) pp. 143–150.

 

24. Jeoung Han Kim, S.L. Semiatin, You Hwan Lee, Chong Soo Lee…: “A Self-Consistent Approach for Modeling the Flow Behavior of the Alpha and Beta Phases in Ti-6Al-4V” Metallurgical and Materials Transactions A, vol. 42A, (2011) pp. 1805-1814.

 

25. Jeoung Han Kim*…, Thak Sang Byun, David T. Hoelzer: “Stress relaxation behavior of nanocluster-strengthened ferritic alloy at high temperatures” Journal of Nuclear Materials, Vol. 425 (2012) pp. 147–155.

​
 

:Symbol '*' …indicates corresponding-author.